10 Foot Measuring Stick Decal Sticker 1 inch x 10 foot

Description

This is for a (1) 10 Foot x 1 Inch Measuring Stick Decal
Sticker
"Cut Just For You"
All Our Decals Are Made In America
All decals are made with premium high quality vinyl rated 5-7 years of out door use
These are great Hardware Stores that sell different sizes of pipe, lumber, ect.
They measure approximately 1.0 inch x 10.0 foot
If you have any questions feel free to ask.
Thank You
decalbarn
Directions:
Please apply only to a clean, dry, surface.
Below are some instructions on how to apply these stickers:
Step 1:
Rub the sticker to be sure the transfer tape is properly adhered to the sticker.
Step 2:
Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.
Step 3:
Remove the paper backing slowly making sure the sticker stays adhered to the transfer tape
Step 4:
Carefully position the sticker to the desired area. Once the sticker sticks it will be nearly impossible to re-position without destroying the sticker. Rub the sticker from one side to the other, eliminating any air bubbles.
Step 5:
Use a hard-edged object like a credit card to make sure the entire sticker is fully adhered to the surface.
Step 6:
Slowly remove the transfer tape. Making sure no part of the sticker remains on the transfer tape.
Step 7
Check for air bubbles. In most cases air bubbles, can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible, once the bubble is gone.